Module 43: Understand Slope of a Line
Learning Objectives
By the end of this section, you will be able to:
 Use geoboards to model slope
 Use to find the slope of a line from its graph
 Find the slope of horizontal and vertical lines
 Use the slope formula to find the slope of a line between two points
 Graph a line given a point and the slope
 Solve slope applications
When you graph linear equations, you may notice that some lines tilt up as they go from left to right and some lines tilt down. Some lines are very steep and some lines are flatter. What determines whether a line tilts up or down or if it is steep or flat?
In mathematics, the ‘tilt’ of a line is called the slope of the line. The concept of slope has many applications in the real world. The pitch of a roof, grade of a highway, and a ramp for a wheelchair are some examples where you literally see slopes. And when you ride a bicycle, you feel the slope as you pump uphill or coast downhill.
In this section, we will explore the concept of slope.
Use Geoboards to Model Slope
A geoboard is a board with a grid of pegs on it. Using rubber bands on a geoboard gives us a concrete way to model lines on a coordinate grid. By stretching a rubber band between two pegs on a geoboard, we can discover how to find the slope of a line.
Doing the Manipulative Mathematics activity “Exploring Slope” will help you develop a better understanding of the slope of a line. (Graph paper can be used instead of a geoboard, if needed.)
We’ll start by stretching a rubber band between two pegs as shown in (Figure 1).
Doesn’t it look like a line?
Now we stretch one part of the rubber band straight up from the left peg and around a third peg to make the sides of a right triangle, as shown in (Figure 2)
We carefully make a 90º angle around the third peg, so one of the newly formed lines is vertical and the other is horizontal.
To find the slope of the line, we measure the distance along the vertical and horizontal sides of the triangle. The vertical distance is called the rise and the horizontal distance is called the run, as shown in (Figure 3).
If our geoboard and rubber band look just like the one shown in (Figure 4), the rise is 2. The rubber band goes up 2 units. (Each space is one unit.)
The rise on this geoboard is 2, as the rubber band goes up two units.
What is the run?
The rubber band goes across 3 units. The run is 3 (see (Figure 4)).
The slope of a line is the ratio of the rise to the run. In mathematics, it is always referred to with the letter .
Slope of a line
The slope of a line of a line is .
The rise measures the vertical change and the run measures the horizontal change between two points on the line.
What is the slope of the line on the geoboard in (Figure 4)?
The line has slope . This means that the line rises 2 units for every 3 units of run.
When we work with geoboards, it is a good idea to get in the habit of starting at a peg on the left and connecting to a peg to the right. If the rise goes up it is positive and if it goes down it is negative. The run will go from left to right and be positive.
EXAMPLE 1
What is the slope of the line on the geoboard shown?
Use the definition of slope: .
Start at the left peg and count the spaces up and to the right to reach the second peg.
The rise is 3.  
The run is 4.  
The slope is . 
This means that the line rises 3 units for every 4 units of run.
TRY IT 1.1
What is the slope of the line on the geoboard shown?
Show answer
TRY IT 1.2
What is the slope of the line on the geoboard shown?
Show answer
EXAMPLE 2
What is the slope of the line on the geoboard shown?
Use the definition of slope: .
Start at the left peg and count the units down and to the right to reach the second peg.
The rise is −1.  
The run is 3.  
The slope is . 
This means that the line drops 1 unit for every 3 units of run.
TRY IT 2.1
What is the slope of the line on the geoboard?
Show answer
TRY IT 2.2
What is the slope of the line on the geoboard?
Show answer
Notice that in (Example 1) the slope is positive and in (Example 2) the slope is negative. Do you notice any difference in the two lines shown in (Figure 5a) and (Figure 5b)?
Positive and negative slopes
We ‘read’ a line from left to right just like we read words in English. As you read from left to right, the line in (Figure 5a) is going up; it has positive slope. The line in (Figure 5b) is going down; it has negative slope.
EXAMPLE 3
Use a geoboard to model a line with slope .
To model a line on a geoboard, we need the rise and the run.
Use the slope formula.  
Replace with . 
So, the rise is 1 and the run is 2
Start at a peg in the lower left of the geoboard.
Stretch the rubber band up 1 unit, and then right 2 units.
The hypotenuse of the right triangle formed by the rubber band represents a line whose slope is .
TRY IT 3.1
Model the slope . Draw a picture to show your results.
Show answer
TRY IT 3.2
Model the slope . Draw a picture to show your results.
Show answer
EXAMPLE 4
Use a geoboard to model a line with slope .
Use the slope formula.  
Replace with . 
So, the rise is and the run is 4
Since the rise is negative, we choose a starting peg on the upper left that will give us room to count down.
We stretch the rubber band down 1 unit, then go to the right 4 units, as shown.
The hypotenuse of the right triangle formed by the rubber band represents a line whose slope is .
TRY IT 4.1
Model the slope . Draw a picture to show your results.
Show answer
TRY IT 4.2
Model the slope . Draw a picture to show your results.
Show answer
Use to Find the Slope of a Line from its Graph
Now, we’ll look at some graphs on the coordinate plane and see how to find their slopes. The method will be very similar to what we just modeled on our geoboards.
To find the slope, we must count out the rise and the run. But where do we start?
We locate two points on the line whose coordinates are integers. We then start with the point on the left and sketch a right triangle, so we can count the rise and run.
EXAMPLE 5
Find the slope of the line shown.
TRY IT 5.1
Find the slope of the line shown.
Show answer
TRY IT 5.2
Find the slope of the line shown.
Show answer
HOW TO: Find the slope of a line from its graph using .
 Locate two points on the line whose coordinates are integers.
 Starting with the point on the left, sketch a right triangle, going from the first point to the second point.
 Count the rise and the run on the legs of the triangle.
 Take the ratio of rise to run to find the slope, .
EXAMPLE 6
Find the slope of the line shown.
Locate two points on the graph whose coordinates are integers.  and 
Which point is on the left?  
Starting at , sketch a right triangle to .  
Count the rise—it is negative.  The rise is . 
Count the run.  The run is 3. 
Use the slope formula.  
Substitute the values of the rise and run.  
Simplify.  
The slope of the line is . 
So increases by 3 units as decreases by 2 units.
What if we used the points and to find the slope of the line?
The rise would be and the run would be 9. Then , and that simplifies to . Remember, it does not matter which points you use—the slope of the line is always the same.
TRY IT 6.1
Find the slope of the line shown.
Show answer
TRY IT 6.2
Find the slope of the line shown.
Show answer
In the last two examples, the lines had yintercepts with integer values, so it was convenient to use the yintercept as one of the points to find the slope. In the next example, the yintercept is a fraction. Instead of using that point, we’ll look for two other points whose coordinates are integers. This will make the slope calculations easier.
EXAMPLE 7
Find the slope of the line shown.
Locate two points on the graph whose coordinates are integers.  and 
Which point is on the left?  
Starting at , sketch a right triangle to .  
Count the rise.  The rise is 3. 
Count the run.  The run is 5. 
Use the slope formula.  
Substitute the values of the rise and run.  
The slope of the line is . 
This means that increases 5 units as increases 3 units.
When we used geoboards to introduce the concept of slope, we said that we would always start with the point on the left and count the rise and the run to get to the point on the right. That way the run was always positive and the rise determined whether the slope was positive or negative.
What would happen if we started with the point on the right?
Let’s use the points and again, but now we’ll start at .
Count the rise.  The rise is . 
Count the run. It goes from right to left, so it is negative.  The run is . 
Use the slope formula.  
Substitute the values of the rise and run.  
The slope of the line is . 
It does not matter where you start—the slope of the line is always the same.
TRY IT 7.1
Find the slope of the line shown.
Show answer
EXAMPLE 7.2
Find the slope of the line shown.
Show answer
Find the Slope of Horizontal and Vertical Lines
Do you remember what was special about horizontal and vertical lines? Their equations had just one variable.
So how do we find the slope of the horizontal line ? One approach would be to graph the horizontal line, find two points on it, and count the rise and the run. Let’s see what happens when we do this.
What is the rise?  The rise is . 
Count the run.  The run is . 
What is the slope?  
The slope of the horizontal line is . 
All horizontal lines have slope 0. When the ycoordinates are the same, the rise is 0.
Slope of a horizontal line
The slope of a horizontal line, , is 0.
The floor of your room is horizontal. Its slope is 0. If you carefully placed a ball on the floor, it would not roll away.
Now, we’ll consider a vertical line, the line.
What is the rise?  The rise is . 
Count the run.  The run is . 
What is the slope? 
But we can’t divide by 0. Division by 0 is not defined. So we say that the slope of the vertical line is undefined.
The slope of any vertical line is undefined. When the xcoordinates of a line are all the same, the run is 0.
Slope of a vertical line
The slope of a vertical line, , is undefined.
EXAMPLE 8
Find the slope of each line:
a) b) .
a)
This is a vertical line.
Its slope is undefined.
b)
This is a horizontal line.
It has slope 0.
TRY IT 8.1
Find the slope of the line: .
Show answer
undefined
TRY 8.2
Find the slope of the line: .
Show answer
0
Quick guide to the slopes of lines
Remember, we ‘read’ a line from left to right, just like we read written words in English.
Use the Slope Formula to find the Slope of a Line Between Two Points
Sometimes we’ll need to find the slope of a line between two points when we don’t have a graph to count out the rise and the run. We could plot the points on grid paper, then count out the rise and the run, but as we’ll see, there is a way to find the slope without graphing. Before we get to it, we need to introduce some algebraic notation.
We have seen that an ordered pair gives the coordinates of a point. But when we work with slopes, we use two points. How can the same symbol be used to represent two different points? Mathematicians use subscripts to distinguish the points.
The use of subscripts in math is very much like the use of last name initials in elementary school. Maybe you remember Laura C. and Laura M. in your third grade class?
We will use to identify the first point and to identify the second point.
If we had more than two points, we could use , , and so on.
Let’s see how the rise and run relate to the coordinates of the two points by taking another look at the slope of the line between the points and .
Since we have two points, we will use subscript notation, .
On the graph, we counted the rise of 3 and the run of 5
Notice that the rise of 3 can be found by subtracting the ycoordinates 6 and 3
And the run of 5 can be found by subtracting the xcoordinates 7 and 2
We know . So .
We rewrite the rise and run by putting in the coordinates .
But 6 is , the ycoordinate of the second point and 3 is , the ycoordinate of the first point.
So we can rewrite the slope using subscript notation.
Also, 7 is , the xcoordinate of the second point and 2 is , the xcoordinate of the first point.
So, again, we rewrite the slope using subscript notation.
We’ve shown that is really another version of . We can use this formula to find the slope of a line when we have two points on the line.
Slope formula
The slope of the line between two points and is
This is the slope formula.
The slope is:
EXAMPLE 9
Use the slope formula to find the slope of the line between the points and .
We’ll call point #1 and point #2.  . 
Use the slope formula.  . 
Substitute the values.  
of the second point minus of the first point  . 
of the second point minus of the first point  . 
Simplify the numerator and the denominator.  . 
Simplify.  . 
Let’s confirm this by counting out the slope on a graph using .
It doesn’t matter which point you call point #1 and which one you call point #2. The slope will be the same. Try the calculation yourself.
TRY IT 9.1
Use the slope formula to find the slope of the line through the points: and .
Show answer
1
TRY IT 9.2
Use the slope formula to find the slope of the line through the points: and .
Show answer
1
EXAMPLE 10
Use the slope formula to find the slope of the line through the points and .
We’ll call point #1 and point #2.  . 
Use the slope formula.  . 
Substitute the values.  
of the second point minus of the first point  . 
of the second point minus of the first point  . 
Simplify. 
Let’s verify this slope on the graph shown.
TRY IT 10.1
Use the slope formula to find the slope of the line through the points: and .
Show answer
TRY IT 10.2
Use the slope formula to find the slope of the line through the pair of points: and .
Show answer
10
Graph a Line Given a Point and the Slope
Up to now, in this chapter, we have graphed lines by plotting points, by using intercepts, and by recognizing horizontal and vertical lines.
One other method we can use to graph lines is called the point–slope method. We will use this method when we know one point and the slope of the line. We will start by plotting the point and then use the definition of slope to draw the graph of the line.
EXAMPLE 11
Graph the line passing through the point whose slope is .
EXAMPLE 11.1
Graph the line passing through the point with the slope .
Show answer
TRY IT 11.2
Graph the line passing through the point with the slope .
Show answer
Graph a line given a point and the slope.
 Plot the given point.
 Use the slope formula to identify the rise and the run.
 Starting at the given point, count out the rise and run to mark the second point.
 Connect the points with a line.
EXAMPLE 12
Graph the line with yintercept 2 whose slope is .
Plot the given point, the yintercept, .
Identify the rise and the run.  
Count the rise and the run. Mark the second point.
Connect the two points with a line.
You can check your work by finding a third point. Since the slope is , it can be written as . Go back to and count out the rise, 2, and the run, .
TRY IT 12.1
Graph the line with the yintercept 4 and slope .
Show answer
TRY IT 12.2
Graph the line with the xintercept and slope .
Show answer
EXAMPLE 13
Graph the line passing through the point whose slope is .
Plot the given point.
Identify the rise and the run.  
Write 4 as a fraction.  
Count the rise and run and mark the second point.
Connect the two points with a line.
You can check your work by finding a third point. Since the slope is , it can be written as . Go back to and count out the rise, , and the run, .
TRY IT 13.1
Graph the line with the point and slope .
Show answer
EXAMPLE 13.2
Graph the line with the point and slope .
Show answer
Solve Slope Applications
At the beginning of this section, we said there are many applications of slope in the real world. Let’s look at a few now.
EXAMPLE 14
The ‘pitch’ of a building’s roof is the slope of the roof. Knowing the pitch is important in climates where there is heavy snowfall. If the roof is too flat, the weight of the snow may cause it to collapse. What is the slope of the roof shown?
Use the slope formula.  
Substitute the values for rise and run.  
Simplify.  
The slope of the roof is .  
The roof rises 1 foot for every 2 feet of horizontal run. 
TRY IT 14.1
Use (Example 14), substituting the rise = 14 and run = 24
Show answer
TRY IT 14.2
Use (Example 14), substituting rise = 15 and run = 36
Show answer
EXAMPLE 15
Have you ever thought about the sewage pipes going from your house to the street? They must slope down inch per foot in order to drain properly. What is the required slope?
Use the slope formula.  
Simplify.  
The slope of the pipe is . 
The pipe drops 1 inch for every 48 inches of horizontal run.
TRY IT 15.1
Find the slope of a pipe that slopes down inch per foot.
Show answer
TRY IT 15.2
Find the slope of a pipe that slopes down inch per yard.
Show answer
Access these online resources for additional instruction and practice with understanding slope of a line.
Key Concepts
 Find the Slope of a Line from its Graph using
 Locate two points on the line whose coordinates are integers.
 Starting with the point on the left, sketch a right triangle, going from the first point to the second point.
 Count the rise and the run on the legs of the triangle.
 Take the ratio of rise to run to find the slope.
 Graph a Line Given a Point and the Slope
 Plot the given point.
 Use the slope formula to identify the rise and the run.
 Starting at the given point, count out the rise and run to mark the second point.
 Connect the points with a line.
 Slope of a Horizontal Line
 The slope of a horizontal line, , is 0.
 Slope of a vertical line
 The slope of a vertical line, , is undefined
Glossary
 geoboard
 A geoboard is a board with a grid of pegs on it.
 negative slope
 A negative slope of a line goes down as you read from left to right.
 positive slope
 A positive slope of a line goes up as you read from left to right.
 rise
 The rise of a line is its vertical change.
 run
 The run of a line is its horizontal change.
 slope formula
 The slope of the line between two points and is .
 slope of a line
 The slope of a line is . The rise measures the vertical change and the run measures the horizontal change.
Practice exercises
Exercises
Use Geoboards to Model Slope
In the following exercises, find the slope modeled on each geoboard.
1.

2. 
3.

4. 
5.

6. 
7.

8. 
In the following exercises, model each slope. Draw a picture to show your results.
9.  10. 
11.  12. 
13.  14. 
15.  16. 
Exercises
Use to find the Slope of a Line from its Graph
In the following exercises, find the slope of each line shown.
17.

18. 
19.

20. 
21.

22. 
23.

24. 
25.

26. 
27.

28. 
29.

30. 
31.

32. 
Exercises
Find the Slope of Horizontal and Vertical Lines
In the following exercises, find the slope of each line.
33.  34. 
35.  36. 
37.  38. 
39.  40. 
Use the Slope Formula to find the Slope of a Line between Two Points
In the following exercises, use the slope formula to find the slope of the line between each pair of points.
41.  42. 
43.  44. 
45.  46. 
47.  48. 
49.  50. 
51.  52. 
Graph a Line Given a Point and the Slope
In the following exercises, graph each line with the given point and slope.
53. ;  54. ; 
55. ;  56. ; 
57. ;  58. ; 
59. ;  60.; 
61. yintercept 3;  62. yintercept 5; 
63. xintercept ;  64. xintercept ; 
65. ;  66. ; 
67. ;  67. ; 
Exercises
Everyday Math
69. Slope of a roof. An easy way to determine the slope of a roof is to set one end of a 12 inch level on the roof surface and hold it level. Then take a tape measure or ruler and measure from the other end of the level down to the roof surface. This will give you the slope of the roof. Builders, sometimes, refer to this as pitch and state it as an “ 12 pitch” meaning , where is the measurement from the roof to the level—the rise. It is also sometimes stated as an “in12 pitch”.

70. The slope of the roof shown here is measured with a 12” level and a ruler. What is the slope of this roof? 
71. Road grade. A local road has a grade of 6%. The grade of a road is its slope expressed as a percent. Find the slope of the road as a fraction and then simplify. What rise and run would reflect this slope or grade? 
72. Highway grade. A local road rises 2 feet for every 50 feet of highway. a) What is the slope of the highway? 
73. Wheelchair ramp. The rules for wheelchair ramps require a maximum 1inch rise for a 12inch run. a) How long must the ramp be to accommodate a 24inch rise to the door?

74. Wheelchair ramp. A 1inch rise for a 16inch run makes it easier for the wheelchair rider to ascend a ramp. a) How long must a ramp be to easily accommodate a 24inch rise to the door? 
Writing Exercises
75. What does the sign of the slope tell you about a line?  76. How does the graph of a line with slope differ from the graph of a line with slope ? 
77. Why is the slope of a vertical line “undefined”? 
Answers
1.  3. 
5.  7. 
9.

11.

13.

15.

17.  19. 
21.  23. 
25.  27. 
29.  31. 
33. 0  35. undefined 
37. 0  39. undefined 
41.  43. 
45.  47. 
49.  51. 
53.

55.

57.

59.

61.

63.

65.

67.

69. a) b) 4 12 pitch or 4in12 pitch  71. ; rise = 3, run = 50 
73. a) 288 inches (24 feet) b) Models will vary.  75. When the slope is a positive number the line goes up from left to right. When the slope is a negative number the line goes down from left to right. 
77. A vertical line has 0 run and since division by 0 is undefined the slope is undefined. 
Attributions
This chapter has been adapted from “Understand Slope of a Line” in Elementary Algebra (OpenStax) by Lynn Marecek and MaryAnne AnthonySmith, which is under a CC BY 4.0 Licence. Adapted by Izabela Mazur. See the Copyright page for more information.