2 1.2 Entering, Editing, and Managing Data

Learning Objectives

  1. Understand how to enter data into a worksheet.
  2. Examine how to edit data in a worksheet.
  3. Examine how Auto Fill is used when entering data.
  4. Understand how to delete data from a worksheet and use the Undo command.
  5. Examine how to adjust column widths and row heights in a worksheet.
  6. Understand how to hide columns and rows in a worksheet.
  7. Examine how to insert columns and rows into a worksheet.
  8. Understand how to delete columns and rows from a worksheet.
  9. Learn how to move data to different locations in a worksheet.

In this section, we will begin the development of the workbook shown in Figure 1.1. The skills covered in this section are typically used in the early stages of developing one or more worksheets in a workbook.

Entering Data

You will begin building the workbook shown in Figure 1.1 by manually entering data into the worksheet. The following steps explain how the column headings in Row 2 are typed into the worksheet:

  1. Click cell location A2 on the worksheet.
  2. Type the word Month.
  3. Press the RIGHT ARROW key. This will enter the word into cell A2 and activate the next cell to the right.
  4. Type Unit Sales and press the RIGHT ARROW key.
  5. Repeat step 4 for the words Average Price and then again for Sales Dollars.

Figure 1.15 shows how your worksheet should appear after you have typed the column headings into Row 2. Notice that the word Price in cell location C2 is not visible. This is because the column is too narrow to fit the entry you typed. We will examine formatting techniques to correct this problem in the next section.

Cell C2 activated with "Average Price" in formula displayed as "Average P" in cell due to narrow column.
Figure 1.15 Entering Column Headings into a Worksheet

 

Integrity Check

Column Headings

It is critical to include column headings that accurately describe the data in each column of a worksheet. In professional environments, you will likely be sharing Excel workbooks with coworkers. Good column headings reduce the chance of someone misinterpreting the data contained in a worksheet, which could lead to costly errors depending on your career.

 

  1. Click cell B3.
  2. Type the number 2670 and press the ENTER key. After you press the ENTER key, cell B4 will be activated. Using the ENTER key is an efficient way to enter data vertically down a column.
  3. Enter the following numbers in cells B4 through B14:  2160515, 590, 1030, 2875, 2700, 900, 775, 1180, 1800, and 4560.
  4. Click cell C3.
  5. Type the number 9.99 and press the ENTER key.
  6. Enter the following numbers in cells C4 through C14:  12.49, 14.99, 17.49, 14.99, 12.49, 9.99, 19.99, 19.99, 19.99, 17.49, and 14.99.
  7. Click cell D3.
  8. Type the number 26685 and press the ENTER key.
  9. Enter the following numbers in cells D4 through D14:  26937, 7701, 10269, 15405, 35916, 26937, 17958, 15708, 23562, 31416, and 75125.
  10. When finished, check that the data you entered matches Figure 1.16.

Why?

Avoid Formatting Symbols When Entering Numbers

When typing numbers into an Excel worksheet, it is best to avoid adding any formatting symbols such as dollar signs and commas. Although Excel allows you to add these symbols while typing numbers, it slows down the process of entering data. It is more efficient to use Excel’s formatting features to add these symbols to numbers after you type them into a worksheet.

Integrity Check

Data Entry

It is very important to proofread your worksheet carefully, especially when you have entered numbers. Transposing numbers when entering data manually into a worksheet is a common error. For example, the number 563 could be transposed to 536. Such errors can seriously compromise the integrity of your workbook.

Integrity Check

Figure 1.16 shows how your worksheet should appear after entering the data. Check your numbers carefully to make sure they are accurately entered into the worksheet.

Numbers have been entered into columns B, C, and D without symbols such as dollar signs or commas.
Figure 1.16  Completed Data Entry for Columns B, C, and D

Editing Data

Data that has been entered in a cell can be changed by double clicking the cell location or using the Formula Bar. You may have noticed that as you were typing data into a cell location, the data you typed appeared in the Formula Bar. The Formula Bar can be used for entering data into cells as well as for editing data that already exists in a cell. The following steps provide an example of entering and then editing data that has been entered into a cell location:

  1. Click cell A15 in the Sheet1 worksheet.
  2. Type the abbreviation Tot and press the ENTER key.
  3. Click cell A15.
  4. Move the mouse pointer up to the Formula Bar. You will see the pointer turn into a cursor. Move the cursor to the end of the abbreviation Tot and left click.
  5. Type the letters al to complete the word Total.
  6. Click the check mark to the left of the Formula Bar (see Figure 1.17). This will enter the change into the cell.

 

Checkmark left of formula bar is highlighted and "Total" is typed in formula bar. "Total" appears in active cell A15.
Figure 1.17 Using the Formula Bar to Edit and Enter Data

 

  1. Double click cell A15.
  2. Add a space after the word Total and type the word Sales.
  3. Press the ENTER key.

Keyboard Shortcuts

Editing Data in a Cell

  • Activate the cell that is to be edited and press the F2 key on your keyboard.
    • Excel for Mac icon Same for Mac Users

Auto Fill

The Auto Fill feature is a valuable tool when manually entering data into a worksheet. This feature has many uses, but it is most beneficial when you are entering data in a defined sequence, such as the numbers 2, 4, 6, 8, and so on, or nonnumeric data such as the days of the week or months of the year. The following steps demonstrate how Auto Fill can be used to enter the months of the year in Column A:

  1. Click cell A3 in the Sheet1 worksheet.
  2. Type the word January and press the ENTER key.
  3. Click cell A3 again.
  4. Move the mouse pointer to the lower right corner of cell A3. You will see a small square in this corner of the cell; this is called the Fill Handle (See Figure 1.18) When the mouse pointer gets close to the Fill Handle, the white block plus sign will turn into a black plus  (+) sign.
Cell A3 is activated with "January" entered. Fill handle is shown at bottom right corner of cell.
Figure 1.18 Fill Handle

Left click and drag the Fill Handle to cell A14. Notice that the Auto Fill tip box indicates what month will be placed into each cell (see Figure 1.19). Release the mouse button when the tip box reads “December.”

Cells A3 through A14 highlighted using Fill Handle (black plus sign). "December" in tip box indicates that word will be entered into cell A14.
Figure 1.19  Using Auto Fill to Enter the Months of the Year

 

Once you release the left mouse button, all twelve months of the year should appear in the cell range A3:A14, as shown in Figure 1.20. You will also see the Auto Fill Options button. By clicking this button, you have several options for inserting data into a group of cells.

12 months appear in cell range A3:A14. Auto Fill Options Button includes Copy Cells, Fill Series, Fill Formatting Only, Fill Without Formatting and Fill Months.
Figure 1.20 Auto Fill Options Button

 

  1. Click the Auto Fill Options button.
  2. Click the Copy Cells option. This will change the months in the range A4:A14 to January.
  3. Click the Auto Fill Options button again.
  4. Click the Fill Months option to return the months of the year to the cell range A4:A14. The Fill Series option will provide the same result.

Deleting Data and the Undo Command

There are several methods for removing data from a worksheet, a few of which are demonstrated here. With each method, you use the Undo command. This is a helpful command in the event you mistakenly remove data from your worksheet. The following steps demonstrate how you can delete data from a cell or range of cells:

  1. Click cell C2.
  2. Press the DELETE key on your keyboard. This removes the contents of the cell.
    Excel for Mac icon Mac Users: Hold down the Fn key and press the Delete key
  3. Highlight the range C3:C14. Then left click and drag the mouse pointer down to cell C14.
  4. Place the mouse pointer over the Fill Handle. You will see the white block plus sign change to a black plus sign (+).
  5. Click and drag the mouse pointer up to cell C3 (see Figure 1.21). Release the mouse button. The contents in the range C3:C14 will be removed.
Fill Handle dragged up from cell C14 to cell C3 highlighting data in these cells will be deleted. Undo button top left of Home ribbon.
Figure 1.21  Using Auto Fill to Delete Contents of Cell
  1. Click the Undo button in the Quick Access Toolbar (see Figure 1.2). This should replace the data in the range C3:C14.
  2. Click the Undo button again. This should replace the data in cell C2.

Keyboard Shortcuts

Undo Command

  • Hold down the CTRL key while pressing the letter Z on your keyboard.
    • Excel for Mac icon Same for Mac Users.
  • Highlight the range C2:C14 by placing the mouse pointer over cell C2. Then left click and drag the mouse pointer down to cell C14.
  • Click the Clear button in the Home tab of the Ribbon, which is next to the Cells group of commands (see Figure 1.22). This opens a drop-down menu that contains several options for removing or clearing data from a cell. Notice that you also have options for clearing just the formats in a cell or the hyperlinks in a cell.
  • Click the Clear All option. This removes the data in the cell range.
  • Click the Undo button. This replaces the data in the range C2:C14.

 

Clear button and Clear Command drop-down menu: Clear All, Formats, Contents, Comments, Hyperlinks and Remove Hyperlinks.
Figure 1.22 Clear Command Drop-Down Menu

Adjusting Columns and Rows

There are a few entries in the worksheet that appear cut off. For example, the last letter of the word September cannot be seen in cell A11. This is because the column is too narrow for this word. The columns and rows on an Excel worksheet can be adjusted to accommodate the data that is being entered into a cell using three different methods. The following steps explain how to adjust the column widths and row heights in a worksheet:

  1. Bring the mouse pointer between Column A and Column B in the Sheet1 worksheet, as shown in Figure 1.23. You will see the white block plus sign turn into double arrows.
  2. Click and drag the column to the right so the entire word September in cell A11 can be seen. As you drag the column, you will see the column width tip box. This box displays the number of characters that will fit into the column using the Calibri 11-point font which is the default setting for font/size.
  3. Release the left mouse button.

 

Column A and Column B with double arrows on column border between them. Column width tip box indicates width of column, wide enough now to show whole word "September".
Figure 1.23 Adjusting Column Widths

You may find that using the click-and-drag method is inefficient if you need to set a specific character width for one or more columns. Steps 1 through 6 illustrate a second method for adjusting column widths when using a specific number of characters:

  1. Click any cell location in Column A by moving the mouse pointer over a cell location and clicking the left mouse button. You can highlight cell locations in multiple columns if you are setting the same character width for more than one column.
  2. In the Home tab of the Ribbon, left click the Format button in the Cells group.
  3. Click the Column Width option from the drop-down menu. This will open the Column Width dialog box.
  4. Type the number 13 and click the OK button on the Column Width dialog box. This will set Column A to this character width (see Figure 1.24).
  5. Once again bring the mouse pointer between Column A and Column B so that the double arrow pointer displays and then double-click to activate AutoFit. This features adjusts the column width based on the longest entry in the column.
  6. Use the Column Width dialog box (step 6 above) to reset the width to 13.

 

Cell A11 "September" activated and Column Width dialog box opened with "13" entered, the max number of characters to fit in that cell.
Figure 1.24 Column Width Dialog Box

Keyboard Shortcuts

Column Width

  • Press the ALT key on your keyboard, then press the letters H, O, and W one at a time.
  • Excel for Mac icon This keyboard shortcut is not available for Excel for Mac

Steps 1 through 4 demonstrate how to adjust row height, which is similar to adjusting column width:

  1. Click cell A15.
  2. In the Home tab of the Ribbon, left click the Format button in the Cells group.
  3. Click the Row Height option from the drop-down menu. This will open the Row Height dialog box.
  4. Type the number 24 and click the OK button on the Row Height dialog box. This will set Row 15 to a height of 24 points. A point is equivalent to approximately 1/72 of an inch. This adjustment in row height was made to create space between the totals for this worksheet and the rest of the data.

Keyboard Shortcuts

Row Height

  • Press the ALT key on your keyboard, then press the letters H, O, and H one at a time.
  • Excel for Mac icon This keyboard shortcut is not available for Excel for Mac

Figure 1.25 shows the appearance of the worksheet after Column A and Row 15 are adjusted.

Column A width increased, Row 15 height increased to create space between totals and rest of data.
Figure 1.25 Sales Data with Column A and Row 15 Adjusted

Skill Refresher

Adjusting Columns and Rows

  1. Activate at least one cell in the row or column you are adjusting.
  2. Click the Home tab of the Ribbon.
  3. Click the Format button in the Cells group.
  4. Click either Row Height or Column Width from the drop-down menu.
  5. Enter the Row Height in points or Column Width in characters in the dialog box.
  6. Click the OK button.

 

Hiding Columns and Rows

In addition to adjusting the columns and rows on a worksheet, you can also hide columns and rows. This is a useful technique for enhancing the visual appearance of a worksheet that contains data that is not necessary to display. These features will be demonstrated using the GMW Sales Data workbook. However, there is no need to have hidden columns or rows for this worksheet. The use of these skills here will be for demonstration purposes only.

  1. Click cell C1.
  2. Click the Format button in the Home tab of the Ribbon.
  3. Place the mouse pointer over the Hide & Unhide option in the drop-down menu. This will open a submenu of options.
  4. Click the Hide Columns option in the submenu of options (see Figure 1.26). This will hide Column C.

 

Hide & Unhide drop-down menu with commands for hiding and showing rows, columns, and worksheets.
Figure 1.26 Hide & Unhide Submenu

Keyboard Shortcuts

Hiding Columns

  • Hold down the CTRL key while pressing the number 0 on your keyboard.
    • Excel for Mac icon Same for Mac Users

Figure 1.27 shows the workbook with Column C hidden in the Sheet1 worksheet. You can tell a column is hidden by the missing letter C.

 

Columns A, B, then D, indicating column C is hidden.
Figure 1.27 Hidden Column

To unhide a column, follow these steps:

  1. Select the range B1:D1.
  2. Click the Format button in the Home tab of the Ribbon.
  3. Place the mouse pointer over the Hide & Unhide option in the drop-down menu.
  4. Click the Unhide Columns option in the submenu of options. Column C will now be visible on the worksheet.

Keyboard Shortcuts

Unhiding Columns

  • Highlight cells on either side of the hidden column(s), then hold down the CTRL key and the SHIFT key while pressing the close parenthesis key ()) on your keyboard.
  • Excel for Mac icon Mac Users: Hold down Control and Shift keys and press the number 0

The following steps demonstrate how to hide rows, which is similar to hiding columns:

  1. Click cell A3.
  2. Click the Format button in the Home tab of the Ribbon.
  3. Place the mouse pointer over the Hide & Unhide option in the drop-down menu. This will open a submenu of options.
  4. Click the Hide Rows option in the submenu of options. This will hide Row 3.

Keyboard Shortcuts

Hiding Rows

  • Hold down the CTRL key while pressing the number 9 key on your keyboard.
    • Excel for Mac icon Same for Mac Users

To unhide a row, follow these steps:

  1. Select the range A2:A4.
  2. Click the Format button in the Home tab of the Ribbon.
  3. Place the mouse pointer over the Hide & Unhide option in the drop-down menu.
  4. Click the Unhide Rows option in the submenu of options. Row 3 will now be visible on the worksheet.

Keyboard Shortcuts

Unhiding Rows

  • Highlight cells above and below the hidden row(s), then hold down the CTRL key and the SHIFT key while pressing the open parenthesis key (() on your keyboard.
  • Excel for Mac icon Mac Users: Hold down Control and Shift keys and press the number 9

 

Integrity Check

Hidden Rows and Columns

In most careers, it is common for professionals to use Excel workbooks that have been designed by a coworker. Before you use a workbook developed by someone else, always check for hidden rows and columns. You can quickly see whether a row or column is hidden if a row number or column letter is missing.

Skill Refresher

Hiding Columns and Rows

  1. Activate at least one cell in the row(s) or column(s) you are hiding.
  2. Click the Home tab of the Ribbon.
  3. Click the Format button in the Cells group.
  4. Place the mouse pointer over the Hide & Unhide option.
  5. Click either the Hide Rows or Hide Columns option.

Skill Refresher

Unhiding Columns and Rows

  1. Highlight the cells above and below the hidden row(s) or to the left and right of the hidden column(s).
  2. Click the Home tab of the Ribbon.
  3. Click the Format button in the Cells group.
  4. Place the mouse pointer over the Hide & Unhide option.
  5. Click either the Unhide Rows or Unhide Columns option.

Inserting Columns and Rows

Using Excel workbooks that have been created by others is a very efficient way to work because it eliminates the need to create data worksheets from scratch. However, you may find that to accomplish your goals, you need to add additional columns or rows of data. In this case, you can insert blank columns or rows into a worksheet. The following steps demonstrate how to do this:

  1. Click cell C1.
  2. Click the down arrow on the Insert button in the Home tab of the Ribbon (see Figure 1.28).
    Insert button in the Home tab of Ribbon.
    Figure 1.28 Insert Button (Down Arrow)

     

  3. Click the Insert Sheet Columns option from the drop-down menu (see Figure 1.29). A blank column will be inserted to the left of Column C. The contents that were previously in Column C now appear in Column D. Note that columns are always inserted to the left of the activated cell.
    Insert button drop-down menu for inserting cells, rows, columns or sheets.
    Figure 1.29 Insert Drop-Down Menu

     

    Keyboard Shortcuts

    Inserting Columns

    • Press the ALT key and then the letters H, I, and C one at a time. A column will be inserted to the left of the activated cell.
    • Excel for Mac icon Mac Users: First hold down the Control key and press the spacebar to select the column; then hold down the Shift and Controls keys and press the + symbol
  4. Click cell A3.
  5. Click the down arrow on the Insert button in the Home tab of the Ribbon (see Figure 1.28).
  6. Click the Insert Sheet Rows option from the drop-down menu (see Figure 1.29). A blank row will be inserted above Row 3. The contents that were previously in Row 3 now appear in Row 4. Note that rows are always inserted above the activated cell.

Keyboard Shortcuts

Inserting Rows

  • Press the ALT key and then the letters H, I, and R one at a time. A row will be inserted above the activated cell.
  • Excel for Mac icon Mac Users: First hold down the Shift key and press the spacebar to select the row; then hold down the Shift and Controls keys and press the + symbol

Skill Refresher

Inserting Columns and Rows

  1. Activate the cell to the right of the desired blank column or below the desired blank row.
  2. Click the Home tab of the Ribbon.
  3. Click the down arrow on the Insert button in the Cells group.
  4. Click either the Insert Sheet Columns or Insert Sheet Rows option.

Moving Data

Once data are entered into a worksheet, you have the ability to move it to different locations. The following steps demonstrate how to move data to different locations on a worksheet:

  1. Select the range D2:D15.
  2. Bring the mouse pointer to the left edge of cell D2. You will see the white block plus sign change to cross arrows (see Figure 1.30). This indicates that you can left click and drag the data to a new location.
    Column D selected with cross arrows on left indicating that data is ready to be moved.
    Figure 1.30 Moving Data

    Excel for Mac icon Mac Users: when the mouse hovers over the left edge of cell D2, the pointer will turn into a small hand that looks like this: Hand pointer for moving Excel for Mac data

  3. Left Click and drag the mouse pointer to cell C2.
  4. Release the left mouse button. The data now appears in Column C.
  5. Click the Undo button in the Quick Access Toolbar. This moves the data back to Column D.

Integrity Check

Moving Data

Before moving data on a worksheet, make sure you identify all the components that belong with the series you are moving. For example, if you are moving a column of data, make sure the column heading is included. Also, make sure all values are highlighted in the column before moving it.

 

Deleting Columns and Rows

You may need to delete entire columns or rows of data from a worksheet. This need may arise if you need to remove either blank columns or rows from a worksheet or columns and rows that contain data. The methods for removing cell contents were covered earlier and can be used to delete unwanted data. However, if you do not want a blank row or column in your workbook, you can delete it using the following steps:

  1. Click cell A3.
  2. Click the down arrow on the Delete button in the Cells group in the Home tab of the Ribbon.
  3. Click the Delete Sheet Rows option from the drop-down menu (see Figure 1.31). This removes Row 3 and shifts all the data (below Row 2) in the worksheet up one row.

    Keyboard Shortcuts

    Deleting Rows

    • Press the ALT key and then the letters H, D, and R one at a time. The row with the activated cell will be deleted.
    • Excel for Mac icon Mac Users: First hold down the Shift key and press the spacebar to select the row; then hold down Control key and press the – symbol
    Delete button drop-down menu for deleting cells, rows, columns and sheets.
    Figure 1.31 Delete Drop-Down Menu

     

  4. Click cell C1.
  5. Click the down arrow on the Delete button in the Cells group in the Home tab of the Ribbon.
  6. Click the Delete Sheet Columns option from the drop-down menu (see Figure 1.31). This removes Column C and shifts all the data in the worksheet (to the right of Column B) over one column to the left.
  7. Save the changes to your workbook by clicking either the Save button on the Home ribbon; or by selecting the Save option from the File menu.

Keyboard Shortcuts

Deleting Columns

  • Press the ALT key and then the letters H, D, and C one at a time. The column with the activated cell will be deleted.
  • Excel for Mac icon Mac Users: First hold down the Control key and press the spacebar to select the column; then hold down Control key and press the – symbol

Skill Refresher

Deleting Columns and Rows

  1. Activate any cell in the row or column that is to be deleted.
  2. Click the Home tab of the Ribbon.
  3. Click the down arrow on the Delete button in the Cells group.
  4. Click either the Delete Sheet Columns or the Delete Sheet Rows option.

Key Takeaways

  • Column headings should be used in a worksheet and should accurately describe the data contained in each column.
  • Using symbols such as dollar signs when entering numbers into a worksheet can slow down the data entry process.
  • Worksheets must be carefully proofread when data has been manually entered.
  • The Undo command is a valuable tool for recovering data that was deleted from a worksheet.
  • When using a worksheet that was developed by someone else, look carefully for hidden columns or rows.

Attribution

Adapted by Barbara Lave from How to Use Microsoft Excel: The Careers in Practice Series, adapted by The Saylor Foundation without attribution as requested by the work’s original creator or licensee, and licensed under CC BY-NC-SA 3.0.

License

Icon for the Creative Commons Attribution 4.0 International License

Beginning to Intermediate Excel Copyright © 2021 by Open Oregon is licensed under a Creative Commons Attribution 4.0 International License, except where otherwise noted.

Share This Book